Off ramp issue
Off ramp issue
I'm trying to make a off ramp with only the right lane that merges to the off ramp. I must be drawing the line incorrect for the City Traffic Cross. Attached are two images one show how the lanes are forming the other is how I drew the line for the intersection.
- Attachments
-
- CT Merge.JPG (70.17 KiB) Viewed 59231 times
Re: Off ramp issue
this is the second image
- Attachments
-
- CT Merge 2.JPG (59.03 KiB) Viewed 59230 times
Re: Off ramp issue
the second image is correct, just don't add intersection
here is extract from the manual:
"The automatic intersection modeling system makes it possible to quickly arrange numerous typical intersections. Nonetheless, it does not provide flexibility in managing traffic lanes, enabling turns from specific lanes, and making unusual radiuses and curves at intersections. If you are facing a task to develop an uncommon intersection, you need to do it manually. Draw all necessary traffic trajectories, turns and U-turns with splines, assign CityTraffic Road(WSM) modifier and transform the splines into road sections with necessary characteristics. Try to connect the spline edges to the adjacent to intersections road sectors accurately. However, they do not have to be perfectly precise as the system as such is intelligent enough to allocate traffic flows correctly."
here is extract from the manual:
"The automatic intersection modeling system makes it possible to quickly arrange numerous typical intersections. Nonetheless, it does not provide flexibility in managing traffic lanes, enabling turns from specific lanes, and making unusual radiuses and curves at intersections. If you are facing a task to develop an uncommon intersection, you need to do it manually. Draw all necessary traffic trajectories, turns and U-turns with splines, assign CityTraffic Road(WSM) modifier and transform the splines into road sections with necessary characteristics. Try to connect the spline edges to the adjacent to intersections road sectors accurately. However, they do not have to be perfectly precise as the system as such is intelligent enough to allocate traffic flows correctly."
Re: Off ramp issue
So I drew a line for every lane and all lines are one object. I put the City Traffic Road WSM on and run the simulation. The issue is there is no interaction between lanes.
- Attachments
-
- CT Merge.JPG (138.88 KiB) Viewed 59224 times
Re: Off ramp issue
sorry last image mean nothing
Re: Off ramp issue
never mind there is interaction